Russo Products, Inc.

Other Products

M & G DuraVent
(Duravent.com)

2016 Price Lists
Stainless All Fuel ChimneyPellet Vent - Pro
Stove Pipe - Close Clearance 6 in.Gas - Direct Vent - Pro
Stainless Liners - DuraVent and Ventinox 
Pellet Stove Components 


Chimney, Pipe & Venting

DURATECH, CLASS "A" CHIMNEY INSTALLATION GUIDE FOR WOOD STOVES

Installation Key
1DYL or DuraBlack11Tee with Tee Cap
2Ceiling Support Box12Tee Support
3Wall Thimble13Chase Top Flashing
4Chimney Pipe14Base Tee/Double Tee
5Attic Insulation Shield15Anchor Plate
6Flashing16Firestop Radiation Shield*
7Storm Collar17Roof Support
8Chimney Cap18Finishing Collar
9Elbow19DYL Adapter, DuraBlack Slip Connector,
or Snap-Lock Adapter
10Elbow Strap20Stove Adapter

*not shown

  • Refer to our Typical Installation drawings to select the appropriate component parts for your installation.
  • DVL/DuraBlack Chimney Adapter must be used when connecting DVL pipe to a ceiling support box or finishing collar. When Connecting DuraBlack pipe, a DuraBlack Slip Connector or Snap-Lock Adapter must be used.
  • Wall Thimble must be installed with an appropriate length of chimney pipe for all horizontal through-the-wall installations. To accommodate thicker walls, the telescoping pieces can be separated, and a field-fabricated extension may be installed.
  • Attic Insulation Shield must be used in all installations that pass through an attic, regardless of whether the attic is insulated or not.
  • Firestop Radiation Shield must be used when a chimney passes through a floor or ceiling without a support box.



PELLET VENT PRO SYSTEM CHIMNEY INSTALLATION GUIDE

Installation Key
1Vertical Cap990º Elbow
2Storm Collar10Round Horizontal Cap
3Flashing11Wall Thimble
4Cathedral Ceiling Support Box12Ceiling Support Firestop Spacer
5Straight Length Pipe13Tee w/Clean-Out Tee Cap
645º Elbow14Wall Strap
7Appliance Adapter15Attic Insulation
860º Flexible Length  

  • Refer to our Typical Venting Installation drawings to select the appropriate component parts for your installation.
  • The inner pipe diameter should match the outlet size of the appliance. For installations that require 4" vent and the appliance has a 3" outlet, use an Increaser Adapter 3"-4".
  • Check the appliance manufacturer's Installation Instructions to confirm which types of vent configurations are permitted (i.e. horizontal, vertical, chimney reline, etc.). Also, check for any venting restrictions such as maximum horizontal run, minimum and maximum vertical rise, maximum offset, etc.
  • Be fire-safe! Maintain the minimum clearances (air-space) between the vent pipe and nearby combustibles, as specified in the appliance manufacturer's installation instructions. Use proper support and bracing. Follow local building codes and have your venting system inspected.



DURAFLEX CHIMNEY LINER INSTALLATION GUIDE

Installation Key
1DuraFlex SS Cap8DuraFlex Mortar Sleeve
2DuraFlex AL Cap9DuraFlex AL Coupling
3DuraFlex Top Plate10DuraFlex SS Connector
4DuraFlex (SW, Pro, 304, 316) Length11PelletVent Pro Appliance Adapter
5DuraFlex AL Length12Type B Gas Vent Pipe Collar
6DuraFlex SS Tee13Rigid Type B Gas Vent
7DuraFlex AL Tee14Rigid PelletVent (L Vent)

Refer to our Typical Venting Installation drawings to select the appropriate component parts for your installation.

  • The Inner pipe diameter should match the outlet size of the appliance.
  • Check the appliance manufacturer's installation instructions to confirm which type of vent configurations are permitted (i.e. horizontal, vertical, chimney reline, etc.). Also, check for any venting restrictions such as maximum horizontal run, minimum maximum vertical rise, maximum offset, etc.
  • Be fire-safe! Use proper support and bracing. Follow local building codes and have venting system inspected.



DIRECT VENT PRO CHIMNEY INSTALLATION GUIDE

Installation Key
1Vertical Termination Cap990° Elbow
2Storm Collar10Horizontal Termination Cap
(See listed caps for choices)
3Flashing11Snorkel Termination Cap
4Cathedral Ceiling Support Box12Chimney Liner Termination Kit
5Pipe133" Flex
645° Elbow14Co-Axial to Co-Linear Connector
7Class A Chimney Conversion Kit15Masonry Chimney Conversion Kit
84" Flex16Elbow Strap

Refer to our Typical Venting Installation drawings to select the appropriate component parts for your installation.